MPS Loaded premium regulator
Regular price $160.00
Unit price per
This is the normal MPS adjustable regulator itself but its all done up with black fittings and equipped with the regulator locker already. if you do not like the brass fittings in the standard loaded regulator this clean setup is the one for you!
The MPS Pressure Regulator (P/N 1-0352) has 4 ports. A 1/4” NPT inlet (High Pressure) port, an 1/8” NPT gauge (High Pressure) port, a 1/4” NPT outlet and an 1/8” NPT outlet (Regulated Pressure 0-275 psi) port . The ports are all labeled, HP for high pressure and LP for low or regulated pressure. The inlet port is supplied with a 1/4 NPT hex nipple installed that reduces it to 1/8 NPT male that can be installed into the bottle valve actuator of your CO2 bottle or gauge adapter of your nitrous bottle. This can be replaced with a -4 x 1/4 NPT AN fitting and use a -4 line to connect to your high pressure source. The outlet has a 1/4 NPT x ¼ poly fitting. This will go out to your low pressure device. We recommend using a small tank in conjunction with this regulator to insure an adequate volume of gas for your device.